FOR EVERY BOTTLE TYPE

Custom Bottle Labels

Labels for cosmetic, beverage, oil, sauce, supplement and spirits bottles. Factory-direct. Since 2010 — from 100 pcs per design, free proof.

Bottle Label Printing for Every Category

Bottle labels are not a single product — a serum bottle, a beverage bottle, an oil bottle, a sauce bottle, a supplement bottle and a spirits bottle each bring their own shape, surface material and handling conditions. We print custom bottle labels for all of these categories in one factory, so whether you're launching a skincare line, a hot sauce, a craft spirit or a supplement brand, the sizing, material and adhesive get matched to your specific container rather than treated as an afterthought.

Sizing starts with an accurate measurement of the bottle, not the artwork. For a round or curved bottle, measure the diameter at the point where the label will sit and multiply by pi (roughly 3.14) to get the wrap length — a 6cm-diameter bottle needs about 18.8cm of wrap length, an 8cm-diameter bottle needs about 25cm. This calculation tells us how wide a full-wrap label needs to be, or how much width is available for separate front and back panels. Every order includes a free proof showing the exact finished dimensions before we cut anything, so there's no guesswork before production.

Layout is the next decision, and we support all three common formats: a single front label, a matching front-and-back pair, and a full-wrap label that runs the entire way around the bottle. Front/back layouts work well when a bottle has a flat panel or when you want a cleaner look with the back reserved for details, while full-wrap labels suit rounder bottles or brands that want the design to continue uninterrupted around the container. We size each layout to your specific bottle shape, whether it's a tall spirits bottle, a squat sauce jar, or a slim serum bottle.

Material and adhesive selection depends heavily on the bottle's surface. Rigid glass and hard PET or HDPE plastic bottles hold a standard permanent adhesive well because the surface stays still, and they pair nicely with vinyl, PP or PET label stock in matte, gloss, clear or foil finishes. Squeeze bottles are a different case — the container flexes each time it's used, so we switch to a more flexible, curved-surface adhesive that moves with the bottle instead of cracking or lifting at the fold. Getting this match right is what keeps a label bonded for the full life of the product instead of peeling after a few weeks of handling.

Durability is built in across the board. Beverage and sauce bottles get splashed and refrigerated, oil bottles get handled with oily hands, cosmetic and supplement bottles sit in humid bathrooms or get touched daily, and spirits bottles need to survive condensation from ice buckets. We manufacture in waterproof vinyl, PP and PET film that resist water, oils and repeated handling without the print smearing, fading or the label edge lifting. For brands that want a premium, minimalist look, we also offer clear film with white underprint so only the artwork is visible against the glass or plastic, plus foil and soft-touch finishes for a more elevated shelf presence. Manufacturing since 2010. We handle the sizing calculation, material matching, die-cutting and finishing, backed by minimums from 100 pcs per design and a free digital proof on every order.

Built for Every Bottle Shape and Surface

Diameter-to-Wrap Sizing

We calculate the exact wrap length from your bottle's diameter so front/back or full-wrap labels fit flat with no gaps or overlap.

Front, Back & Full-Wrap Layouts

Separate front and back panels, a single wrap-around design, or a custom layout — sized to your bottle shape.

Adhesion Matched to Surface

Standard adhesive for rigid glass, PET and HDPE bottles; flexible curved-surface adhesive for squeeze bottles.

Waterproof & Oil-Resistant

Built for beverage, oil, sauce, supplement and spirits bottles — resists water, oils and repeated handling.

Applications

Cosmetic & Skincare Bottles

Serums, creams and squeeze bottles that need precise small-container sizing and oil resistance.

Beverage & Spirits Bottles

Glass bottles that need clean full-wrap layouts and waterproof durability against condensation.

Oil & Sauce Bottles

Kitchen bottles handled with oily hands and exposed to splashes and spills daily.

Supplement Bottles

PET and HDPE plastic bottles that need durable, secure front/back label layouts.

Specifications & Lead Time

Standard specifications for our custom bottle labels.

Order Facts

We reply within 12 hours.

Get a QuoteWhatsApp Bella

Frequently Asked Questions

Answers about our custom bottle labels.

How do I measure my bottle for a label and calculate wrap length?

Measure the diameter of the bottle at the spot where the label will sit, then multiply by pi (about 3.14) to get the full wrap length — a 6cm-diameter bottle needs roughly an 18.8cm-wide label to go all the way around. Send us the diameter and desired label height for a front/back layout, or the full wrap length for a wrap-around design, and we will confirm the exact finished size on your free proof.

Do you offer front/back label and full-wrap layout options?

Yes. We produce separate front and back labels, single full-wrap labels that cover the entire circumference, and custom layouts sized to your bottle shape and branding needs — just tell us which format you want and we will size it to your container.

Which materials and finishes work best for glass bottles versus plastic bottles?

Glass bottles hold a standard permanent adhesive well since the rigid surface doesn't move, and pair nicely with vinyl, PP or PET stock in matte, gloss, clear or foil finishes. PET and HDPE plastic bottles work with the same materials, while squeeze bottles need a flexible, curved-surface adhesive that moves with the container instead of cracking at the fold.

Are your custom bottle labels waterproof and oil-resistant?

Yes. We manufacture in waterproof vinyl, PP and PET film that resist water, oils, condensation and repeated handling without fading or the print smearing — suitable for beverage, cosmetic, oil, sauce and spirits bottles alike.

What's the minimum order quantity and lead time?

You can start from 100 pcs per design. Unit price drops significantly at 500 pcs and again at 1,000+ pcs, so tell us your quantity range and we will quote the options side by side. Lead time is typically 5–7 business days for samples and 7–14 business days for bulk production.

Do you provide a free design proof?

Yes, every order includes a free digital proof for your approval before production begins, at no extra cost.

Get a quote on custom bottle labels

Tell us your bottle type, size and quantity — free proof, from 100 pcs, 12-hour reply.

Looking for cosmetic-specific bottle labels? Visit our cosmetic bottle labels hub.