SIZED FOR 10ML GLASS VIALS
Custom 10ml Vial Labels
Precisely sized labels for standard 10ml glass vials — waterproof, oil/heat-resistant, high-tack adhesive built to wrap tightly on small curved glass. Factory-direct, from 100 pcs per design, free proof.
Order Facts
| Minimum order | From 100 pcs per design · best pricing at 500+ pcs |
|---|---|
| Design proof | Free digital proof |
| Sample | 5–7 working days |
| Production | 7–14 working days after proof approval |
| Format | Rolls, sheets or single die-cut stickers |
We reply within 12 hours.
Why 10ml Is a Go-To Format
Sizing, measurement, and why this vial size shows up across so many product lines.
The 10ml glass vial is one of the most common small-format containers in use today, and for good reason: it holds enough volume for a meaningful supply without becoming bulky, it fits standard shipping trays and refrigeration racks, and it reads as a serious, lab-grade product on a shelf. Peptide brands, cosmetic serums, essential oil blends, and sample-size runs all gravitate toward the 10ml vial because the size hits a practical middle ground between the tiny 3ml format and larger multi-dose containers.
As a size reference, a standard 10ml vial commonly takes a label in the range of 60×80mm. That figure covers the vial's typical diameter and usable straight-wall height, but it is a starting point for planning artwork — actual glass dimensions vary slightly between manufacturers, so we always confirm your exact measurements before cutting any material.
The 10ml size gives you more layout flexibility than smaller vials. There is enough surface area to run either a full 360° wrap that covers the entire circumference with a continuous design, or a partial front label that leaves a strip of glass visible for a cleaner, more clinical look. Full-wrap layouts are common when brands want maximum shelf presence and a seamless background pattern; partial-wrap is often chosen when the product itself — its color or clarity — is part of the visual appeal.
To measure your own 10ml vial, wrap a flexible tape measure or a strip of paper around the widest point of the glass to get the wrap width, then measure the usable straight-wall height from just below the neck taper down to just above the base curve. Send us both numbers, or simply mail a sample vial, and we will size your artwork with the correct bleed and wrap allowance built in — no guesswork required on your end.
Because the label sits on curved glass that may see cold storage, condensation, oils, or repeated handling, we build every 10ml vial label from waterproof vinyl, PP, or PET film with a high-tack adhesive formulated to hold through freezer temperatures and moisture exposure. Fine text, lot codes, and barcodes are printed with tight registration so they stay crisp even at this compact scale, and full-wrap artwork includes a small overlap seam so the pattern lines up correctly once the label is applied.
Whether you are launching a first small batch or scaling a proven 10ml product line, we confirm size, material, and finish on a free digital proof before anything goes to print, so the label you approve is exactly what arrives on your vials.
Built for Small-Format Precision
What sets a properly sized 10ml vial label apart from a generic sticker.
Precise Small-Format Print
Fine text, lot codes and barcodes are printed with tight registration so they stay sharp and scannable on a ~60×80mm label.
Full-Wrap or Partial-Wrap
A 10ml vial has room for a seamless full wrap or a clean front-facing partial label — both built with the correct overlap and bleed allowance.
Waterproof
Waterproof vinyl, PP or PET film with a high-tack adhesive for condensation, oils and handling. Tell us about freezer or alcohol exposure and we will match the material and confirm it on the sample.
Confirmed Before Production
Every dimension is confirmed on a free digital proof against your measurements or sample vial before a single label is printed.
Specifications & Lead Time
Standard specifications for our custom 10ml vial labels.
| Vial size | 10ml standard, and custom vial dimensions |
|---|---|
| Typical label dimensions | 10ml ~60×80mm reference example · full-wrap and partial-wrap options available |
| Materials | Waterproof vinyl, PP (polypropylene), PET (polyester), clear/transparent film |
| Adhesive | High-tack adhesive formulated for small curved glass |
| Durability | Waterproof, oil/heat-resistant. Tell us about freezer or alcohol exposure and we will match the material and confirm it on the sample. |
| Finishes | Matte, gloss, laminated, foil, holographic |
Frequently Asked Questions
Answers about sizing, materials and ordering our 10ml vial labels.
What label size fits a 10ml vial?
As a starting reference, a standard 10ml glass vial typically takes a label in the range of 60×80mm. This varies by glass manufacturer and vial shape, so it is a planning reference, not a fixed spec — send us your exact vial dimensions or a sample vial and we will confirm the precise size before production.
Can I do a full-wrap or partial-wrap for 10ml?
Yes. A 10ml vial has enough surface area for either a full 360° wrap around the entire circumference or a partial front label that leaves part of the glass visible. Full-wrap artwork is built with a small overlap seam so the design lines up cleanly once applied; partial-wrap is sized to sit centered on the front face.
How do I measure my 10ml vial?
Wrap a strip of paper or a flexible tape measure around the vial at its widest point to get the wrap width, then measure the usable straight-wall height between the neck taper and the base curve for the label height. Send us both numbers — or mail us a sample vial — and we will size the artwork to fit with the correct bleed and wrap allowance.
Are the labels waterproof and freezer-safe?
We use waterproof vinyl, PP or PET film with a high-tack adhesive engineered to stay bonded and legible on small curved glass. Tell us about freezer or alcohol exposure and we will match the material and confirm it on the sample.
What's the minimum order quantity and lead time?
You can start from 100 pcs per design. Unit price drops significantly at 500 pcs and again at 1,000+ pcs, so tell us your quantity range and we will quote the options side by side. Sample turnaround is 5–7 business days, and bulk production runs 7–14 business days after your design proof is approved.
Can you do clear or holographic 10ml labels?
Yes. Clear/transparent film gives a label-over-glass look, and holographic finishes add shelf-standout shine and an anti-counterfeit feel. Both are available on 10ml vial labels alongside our standard matte, gloss, laminated and foil finishes.
Looking for our full range of vial labeling options? Visit the Peptide & Vial Labels hub.
Get a quote on your 10ml vial labels
Send us your vial size or a sample — free proof, from 100 pcs, 12-hour reply.
This page describes the label only — material, adhesive, finish and durability. CSTICKER does not make medical, dosage, efficacy, FDA or GMP claims. Customers are responsible for compliance with all applicable regulations and labeling requirements in their jurisdiction.